Monday, 30 September 2013 23:16

LOGO!MAT L - Series: Pallets

LOGO!MAT L - Series: Pallets

PalletOur LOGO!MAT Pallets are specifically designed and equipped to handle an arry of functions and to provide an excellent base for safe work piece transportation on a LOGO!MAT Conveyor. Due to the simple design of our standard “peanut pallet”, we are able to implement most customer tooling size requirements while maintaining functionality. The unique and patented shape of our pallet allows the use of our patented corner design. This is cost effective and highly efficient compared to other systems, such as lift & transfer. The standardized base peanut pallet is made of high-quality, wear-resistant PE1000 plastic and is available in the following standard configurations for each conveyor width:
 
 
 
 
Pallets
NW229
NW286
NW400
NW514
Short
-
Size: 370 x 286 x 45
Size: 530 x 400 x 45
Size: 700 x 514 x 45
Short, with cut-out
-
Size: 370 x 286 x 45
Cut-out: 200 x 173
Size: 530 x 400 x 45
Cut-out: 330 x 267
Size: 700 x 514 x 45
Cut-out: 424 x 343
Short, reversible
-
Size: 370 x 286 x 45
Size: 530 x 400 x 45
Size: 700 x 514 x 45
Long
Size: 360 x 229 x 45
Size: 530 x 286 x 45
Size: 704 x 400 x 45
Size: 850 x 514 x 45
Long, with cut-out
Size: 360 x 229 x 45
Cut-out: 140 x 140
Size: 530 x 286 x 45
Cut-out: 250 x 173
Size: 704 x 400 x 45
Cut-out: 330 x 267
Size: 850 x 514 x 45
Cut-out: 424 x 343
Long, reversible
Size: 360 x 229 x 45
Size: 530 x 286 x 45
Size: 704 x 400 x 45
Size: 850 x 514 x 45

 

 

Size of available LOGO!MAT pallets: dimensions in [mm].

To allow precise locating possibilities for the parts and to be independent of the plastic material behavior based on environmental conditions, we developed a special interface between the index bushings, the customer tooling plates and our driver pallet. The hardened steel, closed tolerance index bushings get directly and just mounted to the customer top plate. The plastic driver pallet gets clamped with the index bushings against the straight solid top plate. That setup has the following advantages:

  • Direct indexing possibility through the index bushings directly to the tooling plate
  • No tension in the plastic material because of some freedom to move
  • Easy mounting of the customer top plate to our plastic driver pallet
  • No wear at the indexing locations even after many years in production

The integrated steel stop unit insert with included return stop is another feature that is part of the base pallet assembly. The gravity flapper is a simplr device used to hold the pallet at a stop. Pushing a pallet backwards out of the stop location is not possible. A recessed steel strip on the bottom of the plastic pallet builds the target for the pallet present sensors and for high level switches. The length, combined with the center slot in the pallet allows for very easy and fail safe control on the pallet behavior in a stop or locating position. That combination eliminates the need for additional high-level pallet stop switches.

Customized cutouts are available on request. The special design of the base pallet enables it to travel easily around corners and diverters.

Downloads
3D Models
Step Download
LOGO!MAT NW229
3D Basic Component Model

Download...
Step Download
LOGO!MAT NW286
3D Basic Component Model

Download...
Step Download
LOGO!MAT NW400
3D Basic Component Model

Download...
Step Download
LOGO!MAT NW514
3D Basic Component Model

Download...
Freigegeben in Standard components